Qmobile S2 Plus MT6580 firmware Flash File



Qmobile S2 Plus MT6580 firmware Flash File





Initial Steps to Install Firmware on Qmobile S2 Plus

  1. Download and install MTK  Android USB drivers
  2. Download And Install SP Flash Tool

How To Flash Qmobile S2 Plus

  1. First, you need to download and install sp flash tool and usb driver for Qmobile S2 Plus
  2. Download and install MTK  Android USB drivers Qmobile S2 Plus
  3. Then download Firmware file/Flash file/Rom for your phone
  4. Your phone must have 50 % charging before this process
  5. switch off yourmobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
  6. Now open SPflash tool.exe
  7. When sp flash tool open, go to download button in sp flash tool
  8. In download tab, click on scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smart phone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in sp flash tool
  12. Close sp flash tool on your computer and unplug phone
  13. Power on the phone and enjoy
  14. After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait
  15. See detailed Instruction MT flashing sp tool with imges

Download Link



2017-10-06T14:05:50+00:00 October 6th, 2017|Q Mobile|0 Comments

Leave A Comment